Saturday, March 14, 2020

CENTER SEAL POUCH MAKING MACHINE - BAG EX CS405A - Fusiontech International Ahmedabad

CENTER SEAL POUCH MAKING MACHINE - BAG EX CS405A - Fusiontech International Ahmedabad



TECHNICAL SPECIFICATION:
  • Web Width (Lay-Flat Sheet Width) : Maximum 850 Mm & Minimum 170 Mm
  • Draw Length                       : Maximum 500 Mm & Minimum 50 Mm
  • Off-wind Reel Diameter : 500 Mm
  • Film Thickness : Maximum 150 Microns & Minimum 30 Microns
  • Pouch Width : Maximum 400mm& Minimum 75mm
  • Machine Speed : 250 Strokes / Min. ( Depending On Pouch Type, Material, Thickness, Width And Draw Length)
  • Total Connected Load : 7.5 KW
  • Electrical Power : 3 Phase 415VAC, 50 HZ
BASIC MACHINE CONSISTING OF
  • Machine Basic Structure Is Of 20 Mm M.S. Plate
  • Single Roll Un Winder.
  • Center Seal Assly.
  • Un Winder AC Motor With Gear Box
  • Main Motor AC With Gear Box
  • Servo Driven Index   
  • Static Eliminator With Three Electrodes
  • Photocell
  • Stacking Tray
 Pricing Detail:-
Component Specification
Amount (USD)
EXTRA - OPTIONAL – THREE SIDE SEAL
 
EXTRA - OPTIONAL – PERFORATION
 
EXTRA - OPTIONAL – TWO 6 MM HOLE PUNCH
 
EXTRA - OPTIONAL – D PUNCH
 
EXTRA - OPTIONAL – V NOTCH
 
EXTRA - OPTIONAL – BUTTERFLY PUNCH
 
EXTRA - OPTIONAL – EXTRA SEALER (TOP & BOTTOM)

EXTRA - OPTIONAL –ATTACHMENT PLATFORM



TERMS & CONDITIONS:
  1. PRICE:
1.1       Price Quoted Above Is Ex-Works Ahmedabad And Exclusive Of Packing & Forwarding And Sea Freight, Insurance Charges, And Any Other Taxes And Duties Which Will Be Charged Extra At Actual At The Rates As May Be Prevailing At Time Of Dispatch Of Material.
  1. VALIDITY:
2.1       This Offer Is Valid For 15 Days From The Date Hereof.
  1. TERMS OF PAYMENT:
3.1       100% Advance Payment Through Swift
  1. DELIVERY:
4.1       Within 4 Months From The Date Of Receiving Order & Advance
4.2       Sellers Are Not Responsible For Any Loss Or Damage Of Goods In Transit And Therefore It Is Of Immense Importance That Buyer Covers The Goods By A Transit Insurance Policy.
  1. ERECTION AND COMMISSIONING:
5.1       Seller’s   Service   Engineer   Will   Supervise   Erection,   Installation   And Commissioning Of The Line.
5.2       The Buyer Will Have To Provide All Necessary Tools And Tackles, Skilled And Unskilled Labor, Raw-material, Utilities, Measuring And Other Instruments, Etc., Required For Erection And Commissioning Of The Line.
5.3       The Round Air Fare For Seller’s Engineers Based In India Will Be Borne By The Buyer. The Boarding And Lodging In A Reasonably Good Hotel And Daily Local Conveyance From The Hotel To Factory Site For Seller’s Service Engineer/s Will Be Borne / Provided By The Buyer.
5.4       The Buyer Is Requested To Refer To Seller’s General Terms Of Conditions For Engineer’s Charges And Obligations Of The Buyer In Respect Of Commissioning. Diem Allowance Payable To Service Engineer Is USD 150/- Per Day Per Engineer.
  1. PACKING:
6.1       Wooden Box Packing – Export Worthy Packing To Be Done 2% Of The Basic Price  With Wooden Box And Vacuum Pack
  1. BANK CHARGES:
7.1       All The Bank Charges Outside India On Buyer’s Account.

No comments:

Post a Comment