TECHNICAL SPECIFICATION:
- Web Width (Lay-Flat Sheet Width) : Maximum 850 Mm & Minimum 170 Mm
- Draw Length : Maximum 500 Mm & Minimum 50 Mm
- Off-wind Reel Diameter : 500 Mm
- Film Thickness : Maximum 150 Microns & Minimum 30 Microns
- Pouch Width : Maximum 400mm& Minimum 75mm
- Machine Speed : 250 Strokes / Min. ( Depending On Pouch Type, Material, Thickness, Width And Draw Length)
- Total Connected Load : 7.5 KW
- Electrical Power : 3 Phase 415VAC, 50 HZ
BASIC MACHINE CONSISTING OF
- Machine Basic Structure Is Of 20 Mm M.S. Plate
- Single Roll Un Winder.
- Center Seal Assly.
- Un Winder AC Motor With Gear Box
- Main Motor AC With Gear Box
- Servo Driven Index
- Static Eliminator With Three Electrodes
- Photocell
- Stacking Tray
No comments:
Post a Comment